EasyManua.ls Logo

Launch X-431 GDS - Batterybox Hardware Structure

Launch X-431 GDS
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LAUNCH X-431 GDS Batterybox Manual
4
testing in order to avoid judging in error under special
conditions.
5 Bad cell Indicates one of the battery cells is bad and can not
work normally, but for which one is bad, it can’t be
verified. In this case, battery voltage is generally lower
than 11V, mainly resulting from internal circuitry
damage, such as short circuit, open circuit, dummy
weld etc.
2.3 Batterybox structure and test accessories
2.3.1 Batterybox structure
Fig.2-1 Batterybox structure diagram
1. Battery connector: Connect to battery for battery test.
2. B type USB terminal: Connect to the GDS main unit with a USB cable.