Launch X431 V User Manual

How to restore X431 V (X431 Pro) to factory settings
Read this before operation:
1) the following method does not apply to X431 V+ and
X431 Pro3
2) Please use this function carefully, improper operation
may cause the dead of X431 V, besides, after the factory
settings are restored, all user data will be deleted.
Step – by –Step Operation:
Step 1: Make sure power supply is 100% (at least 60%
power or above), and shutdown X431 V.
Step 2: Long press the power button and volume up button
at the side of X431 V, to open the machine, and then come
to the menu as shown in the following Picture A.

Launch X431 V Specifications

General

Resolution	1280 x 800 pixels
Operating System	Android
Connectivity	Wi-Fi, Bluetooth
Camera	5MP Rear
Weight	550 g

Summary

How to Restore X431 V to Factory Settings

Important Precautions Before Operation

Covers compatibility, data loss, and device damage risks before starting the factory reset.

Step 1: Prepare Device and Power Supply

Ensure 100% power supply and shut down the X431 V device before proceeding.

Step 2: Access Recovery Menu

Initiate recovery mode by pressing and holding the power and volume up buttons simultaneously.

Step 3: Performing Factory Data Reset

Navigate to 'wipe data/factory reset' and confirm with the power button.

Step 4: Clearing Cache Partition

After data reset, navigate to 'wipe cache partition' from the recovery menu.

Step 5: Rebooting the Device

Select 'reboot system' to restart the device and complete the factory reset.