Laverda M310 - Cutting Table Identification; Operator Seat Identification

1.3.3 Cutting table identification
The cutting table can be identified by a metal plate
affixed on the left-hand side.
Fig. 6
GUID-3610CEC9-737E-41AA-85AA-06B68EA1ECD5-high.jpg [High]
1.3.4 Operator seat identification
The identification plate is located on the seat
support. If you move the seat fully forward, you
can access it.
Fig. 7
GUID-E36114D5-A361-43F1-99AF-0D2F294F4B2E-high.jpg [High]
GUID-66441212-8400-49B6-A4F1-E02C19D40C1D [V1]
GUID-5C46C81D-9566-4D55-9237-1A2047B3B0FD [V1]
1. General Information
Combines 23
M300-M310_EN_327305015