Laverda M310 - Conformity; EC Declaration of Conformity

1.5 Conformity
1.5.1 EC Declaration of Conformity
The CE Declaration of Conformity, shown below, certifies that the combine was designed and built in
compliance with the regulations currently applicable within the European Community.
The cutting table has its own EC Declaration of Conformity.
Fig. 13
[V]
GUID-9BAE9408-A515-457E-B969-AD975CAABC27 [V1]
GUID-BF5C9038-CE0E-41FE-805F-6CB3310026F6-high.tif [High]
1. General Information
28 Combines
M300-M310_EN_327305015