EasyManua.ls Logo

Lawn Devil DB8605 - Adjusting the Cutting Height; Starting the Engine

Lawn Devil DB8605
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Fill the tank outdoors when the engine is cold. Wipe up spills.
Do not handle gasoline when smoking or around an open flame or sparks.
Store gasoline in an approved fuel container, out of the reach of children.
Please refer to Engine Manual for more details.
Adjusting the Cutting Height
Warning: Adjusting the cutting height may bring you into contact with the moving
blade, causin
g serious injury.
Move the height adjustment forward to lower the height, back to raise the cutting height.
(Figure 8)
Starting the Engine
Before starting the engine, adjust the engine speed lever to the upper start position
n in Figure 9.
Hold on the Upper handle and Blade-control Bar tightly with your right hand, pull the
Recoil-start Grip lightly until you meet then pull briskly. Release the starter
Adjust the Engine Speed Lever to suitable speed for mowing. (Figure 11
)
(Figure 9) (Figu
re 10) (Figure 11)
Fast
speed
Slow
speed
Adjust the height with the engine off.
as show
ressistance,
after the engine starts, as shown in figure 10.
grip gently

Related product manuals