17
4. To start the blower/vacuum, place the ON/OFF switch on I (Low Speed) or II (High Speed) position
(Fig. 9).
5. To stop the blower/vacuum, place the ON/OFF switch in 0 (OFF) position (Fig. 9).
OPERATING THE BLOWER/VACUUM
1. To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly
into the center of a pile.
2. To reduce sound levels, limit the number of pieces of equipment used at any one time.
3. Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen
surfaces when water is available.
4. Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely away.
5. During operation, hold the device with one hand on the main handle and the other on the additional
grip (Fig. 10).
OPERATION
Fig. 10
Fig. 9
0: OFF
I: Low Speed
II: High Speed
To Next Page
Loading...
