18
OPERATION
6. Operate power equipment at reasonable hours only - not early in the morning or late at night when
people might be disturbed. Comply with the times listed in local ordinances.
7. After using blowers or other equipment, CLEAN UP! Dispose of debris properly.
8. This blower is equipped with Overheating Protection for consumer safety. If the tool overheats or the
current is high, the tool will automatically shut-o. Turn the tool o and unplug. It will take several
minutes for the tool to revert to its normal temperature, at which point it can be restarted.
EMPTYING OF COLLECTION BAG
1. Switch o the tool and disconnect the plug.
2. Wait until the impeller fan comes to a standstill before removing the collection bag from the tool.
3. Open the zipper of the collection bag and empty it completely (Fig.11).
Fig. 11
To Next Page
Loading...
