9
GB
• If the power cable for the battey charger
is damaged, it must be replaced by the
manufacturer, a customer service agent
-
son in order to prevent hazards.
• The battery of the appliance is not fully
charged at the time of delivery. It there-
fore needs to be fully recharged before
recharge cycle we recommend that you
charge the battery for about 3-5 hour. Slot
the battery into the base and plug the
battery charger into a mains outlet.
• When the battery is fully charged, un-
plug the charger from the mains and
from the appliance. Charging time is ap-
prox. 3-5 hour.
• Do not charge the battery continuously
since this may damage the battery cells.
Note: Repeatedly charging small capaci-
ties may damage the battery cells. Re-
charge the battery only if the appliance
is becoming slow.
Use
The appliance is solely intended for cut-
ting grass and weeds in the garden and
for edge trimming. Any other use that is
-
tions can result in damage to the trimmer
and give rise to serious danger for the
user. Do not use the appliance to trim
hedges or bushes. The appliance must
only be used by adults. Young people
aged 16 and over may only use the trim-
mer under adult supervision.
The user or operator is responsible for ac-
cidents causing injury to other people or
damage to property.
The manufacturer cannot be held liable
for damage when the trimmer is not used
in conformity with its intended purpose or
due to incorrect operation.
General description
The illustrations are on the
front fold-out page.
Survey
1 Top handle
2 On/Off switch
3 Switch lock
4 Box for cutting inserts (not vis-
ible)
5 Auxiliary handle
6 Handle rod
7 Lock of handle rod adjustment
8 Threaded bush for length adjust-
ment
9 Telescopic shaft
10 Motor head
11
12 Cutting disk
13 Cutting insert
14 Protective cover
15 Pedal for tilt angle adjustment
16 Battery
17 Battery release button
19
Battery charger operation indicator
18
Battery charger
Functional description
The trimming assembly of the manually
controlled, portable, battery-operated lawn
trimmer consists of a system of plastic
knife/cutting insert.
The appliance also features a pivoting mo-
tor head, adjustable aluminium telescopic
shaft, and a spacer bow.
A hood covering the cutting device pro-
tects the user.
The following describes the functions of
the operating parts.
To Next Page
Loading...
