LawnMaster FD2401 User Manual

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

FD2401

540304

FAST SHREDDER

Original Operation Manual

GB

WARNING! Read the instructions before using the product

Before initial start-up, please read through these operating instructions carefully

prior to using the machine. Keep the instructions safe and pass them on

to any subsequent user so that the information is always available.

Serial Number:

Questions and Answers:

M
Maurice GuzmanAug 3, 2025
Why won't my LawnMaster Paper Shredder motor start?
- S
  shannon86Aug 3, 2025
  If the motor of your LawnMaster Paper Shredder won't start, there could be several reasons: * **No mains power supply:** Check the socket, cable, lead, and plug for any damage. If you find damage, have it repaired by qualified personnel. * **Overload protection tripped:** Allow the motor to cool down completely, then press the Reset button and try restarting the unit. * **Lid of housing not closed properly:** Ensure the housing interlock is tightly screwed in.
G
Greg WelchAug 13, 2025
What to do if LawnMaster FD2401 garden waste is not drawn in?
- D
  David PalmerAug 13, 2025
  If your LawnMaster Paper Shredder isn't drawing in garden waste, consider these potential causes and solutions: * **Shredding material is too soft:** Use the pusher to help feed the material, or add some dry twigs/branches to provide more rigidity. * **Shredding material in discharge duct:** Remove the shredding material from the discharge duct. * **Unit blocked:** See section ' Freeing up a jam '.
I
ian12Aug 22, 2025
How to fix LawnMaster Paper Shredder that won’t shred properly?
- C
  connerrobertAug 22, 2025
  If your LawnMaster Paper Shredder isn’t shredding properly, it might be due to blunt blades. Check the blades and either turn, sharpen, or replace them as needed. See section ' sharpening, turning, replacing the blades '.

LawnMaster FD2401 Specifications

General

Shred Size	7 mm
Bin Capacity	10 liters
Auto Start/Stop	Yes
Overload Protection	Yes
Thermal Protection	Yes
Run Time	3 Minutes
Frequency	60 Hz

Summary

Intended Purpose

Intended Purpose

Shredder is for fibrous and wood-related materials such as hedge and tree cuttings.

Safety Precautions

Safety Precautions

Shredder may cause serious injuries if improperly used. Read manual carefully.

Symbols Used In The Instructions

Symbols Used In The Instructions

Explains hazard symbols and precautious symbols for injury and harm prevention.

IMPORTANT

Training

Become familiar with the owner's manual before attempting to operate this equipment.

Preparation

Lists 7 points for safe preparation before operating the shredder.

Operation

Maintenance and storage

Additional safety instructions for units with bagging attachments

Working with the device

CAUTION!

Electrical Safety

CAUTION!

States how to avoid accidents with cables, coupling, plugs, and mains power supply.

Technical Specifications

General Description

Summary

Assembling The Shredder

Unpacking

Instructions for unpacking the shredder components and assembly.

Box contents

Lists the items included in the shredder package.

Attach the collection bag

Guidance on how to attach the collection bag to the shredder.

Assembling the shredder

Steps for assembling the shredder unit.

Start- up

Procedure for initial start-up of the shredder.

Switching the shredder on and off

Instructions for operating the ON/OFF switch and connecting the power.

Emptying the collection bag

Procedure for safely removing and emptying the collection bag.

Overload protection

Explains how the overload protection works and how to restart.

Restart prevention

Details on the unit's behavior after a power interruption.

Working methods

General working instructions for operating the shredder safely.

Sharpening, turning or replacing the blades

Freeing up a jam

Maintenance and cleaning

General cleaning and servicing

Replacement parts

Waste disposal and environmental protection

Trouble Shooting

WARRANTY

Exploded Drawing

EC declaration of conformity