8
GB
-
CAUTION! The following states how
damage to the trimmer and possible injury
CAUTION!
The following states how to avoid accidents
Electrical Safety
supplied and recommended by the manufacturer.
Using third-party parts will immediately invalidate
the guarantee.
• Do not leave the shredder working unattended
and keep it in a dry place out of children’s reach.
• While being used in the open, connect the
shredder to a residual current device (RCD)
or circuit breaker with a trip current of not more
than 30mA.
• Do not reach into the funnel feeder during
operation. The shredder will continue to run for
a short period after you switch it off.
• Make sure that the material inserted into the
shredder does not contain hard objects made
of metal, stone, glass or similar.
• Do not use the shredder in the rain and in bad
weather. Work in daylight or under good lighting
conditions.
•
Do not operate the shredder when you are tired
or distracted, or under the influence of alcohol
or medication. Always take a break when you
need one and be sensible about how you work.
• Switch the shredder off and pull the plug under
the following circumstances:
- when you are not using the device,
- transporting it or leaving it unattended;
- before releasing a jammed blade.
- when you are checking the device, cleaning
it or removing blockages;
- when you are carrying out cleaning or
maintenance work or replacing accessories;
- Before moving or lifting the shredder
- If foreign objects should enter the shredder,
if the shredder is making unfamiliar noises
or vibrations (check the shredder for damage
before starting it up again)
• Do not allow shredded material to accumulate
near the ejection area. This may otherwise
hinder proper ejection and force the material
back up through the feeder.
• Do not transport or tip the shredder with the
motor running.
• Keep hands, other body parts and clothing out
of the filling chamber and ejection channel and
away from other moving parts.
• In the event of blockages in the machine intake
or ejection, switch off the motor and disconnect
the machine from the mains before removing
leftover material in the intake opening or ejection
channel. Ensure that the motor is free of rubbish
and other accumulations in order to safeguard
the motor from damage or possible fire.
to people can be avoided:
• Handle the unit with care. Clean the ventilation
slits regularly; keep to the maintenance instructions.
• Do not overload your device. Work only within
the indicated range of performance.
Do not employ any low power machines for
heavy work. Do not use your device for
purposes for which it has not been designed.
• Only switch the shredder off once the funnel
feeder is completely empty since the shredder
may otherwise clog up and not be able to start
afterwards.
• Do not attempt to repair the shredder yourself
unless you are qualified to do so. Any work not
specified in this manual may only be carried
out by our service centre.
• Damaged cables, coupling and plugs or
connecting leads not corresponding to
specifications, must not be employed. Remove
the plug immediately from the plug socket in
case of damage to the mains cable.
Do not touch the mains power supply cable
under any circumstances until you have pulled
the plug out of the mains socket.
• If the power cable for this equipment is damaged,
it must be replaced by the manufacturer, a
customer service agent of the same or a similarly
qualified person in order to prevent hazards.
• Do not use the appliance if the on/off switch
To Next Page
Loading...