LawnMaster GVB1316 - Assembling the Collection Bag; Installing and Removing the Collection Bag

14
ASSEMBLY
ASSEMBLING THE COLLECTION BAG
■ Check the collection bag before assembling to make sure there is no damage.
■ Pull the grass collection bag over the metal frame as shown (Fig. 6).
■ Pry open the soft plastic clamping sleeves and insert the metal frame into the sleeves. Ensure all sleeves
are properly clamped on the frame.
■ The completely assembled grass collection bag is shown as above (Fig. 7).
Fig. 6
Fig. 8
Fig. 7
Grass Collection Bag
Sleeve
Metal Frame
Sockets
Rods
INSTALLING AND REMOVING THE COLLECTION BAG
NOTE:
The safety ap is spring operated. Ensure you have a rm grip when opening and closing to
avoid personal injury.
Recommendation: Work with the collection bag for dethatching and without the collection bag for
scarifying.
Installing the collection bag:
■ Lift the safety guard ap and hold it in position.
■ Lift the collection bag by its handle and make the collection bag seated on the sockets in the deck (Fig. 8).
■ Release the safety guard ap.