18
OPERATION
To set the cutting height:
its current setting, and then move it towards the back of the mower and engage the lever in the
its current setting, and then move it towards the front of the mower and engage the lever in the
Starting/Stopping the Mower (See Figs. 9-10)
objects.
handle as you mow.
NOTE: A high-pitched noise and sparking may occur as the electric motor decelerates. This is
normal.
The blade may keep rotating for a few seconds after the device has been switched off. Do not
touch the rotating blade. A rotating blade can cause injury.
WARNING
General Operation
Check the product, its power cord and accessories for damage before each use. Before use,
ensure all power connections are in good working order prior to operation. If damage is present or
observed, stop and have mower serviced before use. Do not use the product if it is damaged.
brush. Blocked air vents may lead to overheating and damage the product.
the working area.
mulching plug.
To Next Page
Loading...
