13
cap on the trimmer head while the trimmer is running. This will automatically advance a new length
when tapping the bump cap on the lawn. This advancing process may be repeated as often as
necessary. Never try to advance the line on a hard surface. If the unit fails to advance, stop and
unplug the trimmer, clean the bump cap both inside and out.
NOTE: Regularly check the trimming line for damage and whether the line still has the correct
When no line end is visible:
OPERATION
Risk of injury! Do not operate the appliance without the safety guard.
To operate the appliance, wear suitable clothing, eye and ear protection.
Prior to every use, check that the appliance is operative. Do not block the on/off trigger. The trigger
must reliably turn off the motor when you release it. Do not operate the appliance if the trigger is
damaged.
WARNING
Switching On and Off (See Figs. 4&5)
NOTE:
body. Before turning on the appliance, check that it will not touch any objects.
After turning off the appliance, the trimmer head will continue to rotate for some time. Allow the
trimmer head to come to a complete standstill. Keep hands and feet well away. Risk of injury!
WARNING
Cutting Device - Advancing the Trimming Line
The excess line that is cut off has a chance of hitting the user or other objects. Keep hands and
feet well away.
WARNING
To Next Page
Loading...
Need help?
General
