9
SAFETY INFORMATION
is in safe working condition.
deterioration.
parts of the machine.
power source is switched off, the blades can still be moved.
genuine replacement parts and accessories.
mA.
on the rating plate.
are no more than 75 m long and suitable for outdoor use.
The power cable wire cross section must be at least 2.5
mm
2
. Always completely unroll cable drums before use.
Check the cable for damage.
working. The cutting blades may damage the power cable
and result in contact with live parts. Always run the power
cable behind the operator. The extension cable can be
accidentally cut. Risk of electric shock!
Protect the power cable from heat, oil and sharp edges.
To Next Page