13
ASSEMBLY
ASSEMBLING THE BLOWER TUBES (See Figs. 1-8)
■ Loosen the hose clamps with supplied socket wrench and place the hose clamps onto the outer slot
of the exible hose (Fig. 1).
■ Attach the exible hose to elbow tube and tighten the screw with supplied socket wrench (Fig. 2 & 3).
■ Loosen the handle with supplied spanner and place the handle onto the rear blower tube. Then
tighten the screw with supplied spanner (Fig. 4 & 5).
Flexible Hose
Elbow Tube
Fig. 1
Fig. 2
Fig. 4
Fig. 3
Fig. 5
Hose Clamp
Rear Blower Tube
Handle
To Next Page
Loading...
