15
ADJUSTING SHOULDER STRAPS ON HARNESS (See Figs. 11-12)
Straps should be adjusted to a comfortable position before starting the blower.
To adjust tubing around harness:
■ The blower should be in operating position before adjusting the shoulder straps. Put one arm
through the strap and onto shoulder, pulling the blower onto back. Put the other arm through the
other strap.
■ Grasp the lower adjustment strap and tighten (pull down on strap) until the backpack rests
comfortably against the lower back.
■ Grasp the upper adjustment straps and tighten (pull down on strap) until the backpack ts
comfortably on the shoulders (Fig. 11).
■ Once the blower feels comfortable, secure the chest strap (Fig. 12).
ASSEMBLY
Lower
Adjustment
Strap
Upper Adjustment Strap
Chest Strap
Waist Strap
Fig. 9 Fig. 10
Fig. 11 Fig. 12
Battery Release
Button
Wrong
To Next Page
Loading...
