LawnMaster NPTBL31AB - Blower Usage and Transportation

23
CRUISE CONTROL LEVER (See Fig. 23)
The cruise control lever can be used to operate the blower without holding the throttle lever.
■ To engage, operate the throttle lever toward the suitable speed position for blowing (I), and press
down the cruise control lever (II) (Fig. 23).
■ To release, lift the cruise control lever up.
USING THE BLOWER NOZZLE (See Fig. 24)
Use the blower nozzle when high air speed is required (Fig. 24).
USING THE BLOWER (See Fig. 25)
WARNING
The engine housing can become hot during operation. Do not touch or place any part of your body
or clothing on the engine housing, vents surrounding the mufer, or exhaust port when starting,
operating, or transporting the blower. Stop and allow the engine to cool down for at least 15 minutes
prior to storing the blower and do not allow blower to contact combustible materials when storing.
Contact with the engine housing, mufer vents, or exhaust gases could result in serious burns and/or
ignite combustible materials.
OPERATION
Fig. 23
Fig. 24