T
able of Contents
6/ 68 V1.3/0 mc²66
Routing Masters to Output Destinations 52
Using Auxiliary Sends 54
Creating a Mix Minus (N-1) 55
Configuring the Mix Minus Auxiliary Sends 55
Activating the Mix Minus Sends 58
Using VCA Grouping 59
Assigning VCA Masters to the Control Surface 59
Assigning Channels to a VCA Master 60
Applying Signal Processing 61
Using the 4-band Equaliser 63
Using the High and Low Pass Filters 64
Setting a Compressor 65
Inserting Channel Delay 66
Inserting Outboard Processing 66
Assigning the Fader Strip Free Controls 69
To Next Page
