AC1200 AC750
STEP 3
Relocate the Repeater
1 . For best performance, plug the repeater into an Outlet
halfway between the router and the WiFi dead zone.
The location you choose must be within the range of your
existing WiFi network.
2. Wait until the Signal LED turns solid blue. If not, relocate the repeater
closer to the router.
3. Connect your WiFi devices to the new extended network which is your
original network name plus «_EXT» at the end. Use the original password
from your main router for the password.
WiFi router
AC1200 AC750
Antennas upward and
vertical to the ground
To Next Page
Loading...
Need help?
General