Created for Smart Laziness
3. Select your router’s WiFi network (SSID) that you want to extend.
4. Enter the original password of the WiFi network that you want to
extend (make sure to enter the exact password, otherwise the network
will not be extended). Additionally, in this step, you can also set your own
name for the network to be extended. Once entered, click the «Extend»
button below.
Wait a moment, the «Wireless network
extended successfully» page appears.
Your device will be disconnected from
the repeater’s network and the repeater
automatically reboots to finish the setup
process. Once rebooted and the Signal
LED is solid blue, you can connect to the
extended repeater’s network using your
network’s original password.
To log into the admin panel in the future,
only use the http://re.nextbox.home
address
To Next Page
Loading...
Need help?
General