AC1200 AC750
2. Use an Ethernet cable to connect one of the LAN ports of your
modem/router at the Lan port on the bottom of the repeater.
3. Connect your WiFi device to the repeater’s WiFi network
«NEXTBOX_2.4G_EXT» or «NEXTBOX_5.0G_EXT» (these will be unsecured)
4. Start a web browser, enter
http://re.nextbox.home in the address
bar to log into the repeater’s
installation wizard. Create a login
password for later attempts
(recommended). On the bottom of
the page, choose the «AP mode» and
press the «Next» button
Set the extender’s admin password
Please set the device admin password to
guarantee its safety. This password is required
for subsequent login to the device
Admin password
admin
Confirm admin password
admin
Operating mode
Repeater mode
AP mode
Next
Not now
To Next Page
Loading...
Need help?
General