Created for Smart Laziness
6. Once the AP mode setup is completed, disconnect from the repeater’s
original network and connect to the newly created AP WiFi network using
the password you have set during the previous step.
7. After connecting to the newly created AP WiFi network, you can enter
http://re.nextbox.home in the browser address bar to check the AP network
status
5. At the next step, set your network
name and password. Once completed,
press the «Save and take effect» button
Please set SSID and password
of the Ap
convert the existing wired network to WIFI
SSID (2.4GHz)
Enternet_NEXTBOX_2.4G_EXT
SSID (5.0GHz)
Enternet_NEXTBOX_5.0G_EXT
Save and take effect
Wireless password
yourwifipassword
Repeater Terminal deviveInternet WiFi router