12
FEATURES
• Portable and battery-powered all-in-one audio solution
• Integrated 6-channel mixer with system presets, 3-band EQ and effects (Reverb & Delay)
• DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
• Two receiver slots for wireless microphones or bodypacks
• Two switchable mic or line inputs
• Up to 5 hours battery life at maximum volume, 20 hours at moderate volume
• Priority/ducking mode to highlight microphone signal
• Built-in wheels and retractable handle for easy portability
• 35 mm flange for applications on a speaker pole
• AAC coding for HD Bluetooth® 5.0 streaming
• True Wireless Stereo (TWS) to connect two ANNYs and enjoy true stereo streaming
• USB-C port for charging your mobile devices
• Integrated holder for tablet or phone
• Footswitch input for easy and hands-free control of effects
TRANSPORT
Thanks to the practical castors
1
and the extendable trolley handle
2
, the portable speaker is easy
to transport. Switch off the speaker, remove all connected cables, place the speaker on the floor and press
the marked area in the middle of the handle
3
to unlock it. Now pull the handle out of the speaker housing
as far as it will go. To lower the handle, again press on the marked area in the handle and push the handle
into the housing as far as it will go. For lifting and carrying the speaker, there is an ergonomically shaped
carrying handle
4
behind the trolley handle and additionally two handles on the sides of the housing
5
.
4
5
1
3
2
5
1
ATTENTION:
Avoid rolling the speaker over uneven surfaces such as cobblestones. Also avoid
rolling the speaker over steps. Strong mechanical shocks can damage the castors, the cabinet
and the internal components.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
To Next Page
Loading...
