LD ANNY 10 - Page 32

32
Item number LDANNY10
Cabinet construction Bass reflex
Cabinet material Polypropylene
HF
Horn Constant directivity
Tweeter dimensions 1"
Tweeter dimensions (mm) 25 mm
Tweeter magnet Ferrite
Tweeter brand Custom made
Tweeter voice coil 1"
Tweeter voice coil (mm) 25 mm
Amplier module (integrated)
Amplifier Class D
Protection circuits Short circuit, over temperature
Ambient temperature (in operation) 0 – 40°C
Relative humidity 0 – 80% non-condensing
Fuse T2AL 250V
Controls Main Volume/Menu Navigation, Input 1 Volume, Input 1 Mic/Line Switch,
Input 2 Volume, Input 2 Mic/Line Switch, Input 3+4 Volume, Input 5+6
(Bluetooth) Volume, Effect, Power
Indicators Battery status, multifunctional LC display
Power In IEC
Operating voltage 100 – 240 V 50/60 Hz
Power consumption 150 W
Physical inputs 5
Physical input connectors 2 x 6.3 mm/XLR combo, 2 x RCA, 3.5 mm jack
Mix output 1
Mix output connector XLR male
Bluetooth Standard 5.0
Bluetooth Audio Decoder SBC/AAC
Battery
Rechargable batteries 12 V / 5 Ah
Battery technology Lead Acid
Battery type 6FM5
Indicator battery 4-segment LED
Battery operation time music
(MUSIC preset, full volume)
5 h
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH