Lea 11099-40A3 - Cutting Height Adjustment; Filling with Fuel

29
fig.5 fig.6
6.2 Cutting height adjustment
Adjust the cutting height according to the needs of your lawn. The cutting height depends on
the kind of lawn and its actual height. When mowing high grass, start with the maximum cutting
height and make a second cut with a lower cutting height.
1) Move the lever towards the front of the machine to increase the cutting height and
towards the rear to reduce the cutting height.
2) Return the lever to the locating notch to set the desired cutting height. Make sure the
handle fits snugly and securely into its serrated holder. Obstructions such as grass
clippings should not hinder his movement or positioning.(Fig. 7).
Fig.7
CAUTION: Never adjust the cutting height when the engine is running. Always remove the
spark plug cap before making any adjustments.
6.3 Filling with fuel
Danger of injury!
Fuel is explosive!
DANGER! .- Turn off and cool the motor down before filling the tank with fuel.
- You must observe all safety instructions relating to handing fuel.