31
7.1 Start the unit
Do not start the machine until it has been completely assembled. Before switching on the
machine, always checking the oil.
7.2 Check before use!
Check the safe condition of the device:
Check the machine for leaks.
Check the machine for visual defects.
Check that all parts of the machine have been securely fitted.
Check that all safety machine are in proper condition.
Slide the throttle lever to and fro several times to ensure that it is moving smoothly and
correctly.
WARNING: The cutting blade turns when the engine is being started.
7.3 Mowing
1) Prepare the product according to required application
Function Grass
catcher
Mulching insert Side discharge
attachment
Grass collection
Attached Removed Removed
Mulching Removed Inserted Removed
Side
dischargi
ng
Removed Inserted Attached
2) Make sure that the lawn is clear of stones, sticks, wire or other objects that could damage
the product or its engine.
3) Do not cut wet grass because it tends to stick to the underbody of the machine,
preventing the proper discharge of grass clippings, and it could also cause you to slip and
fall.
Danger of injury!
Do not operate the device unless you did not find any faults. If a
part has become defective, make sure to replace it before you use the
Danger of injury!
Before starting work, always check the ground and remove
all objects which could be thrown by the device.
DANGER!
DANGER!
To Next Page
Loading...
