Leader Electronics Corp. LSG-17 - Maintenance and Voltage Selection

3.9 Exposing the chassis
The chassis can be exposed in the following manner for
inspection:
(1) Loosen one screw
at front part of top cover.
(2) Remove one screw on the bottom side.
(3) Remove one screw at the back.
(4) Take off the cover.
3.10 The Line Voltage Changing
This instrument can be oper-
ated from AC line sources of 100V,
115V -120V or 220V -240V.
The Line Voltage Selector
(pin
connector with plastic cover)
allows one
of three voltages to be
selected.
Fig. 3-1
115~
120V lOOV
9