EasyManua.ls Logo

Leader LT 4610 - Enterprise MIB

Leader LT 4610
325 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23. SNMP
238
5. On the SNMP manager, enable the TRAP transmission destinations.
OID: 1.3.6.1.4.1.leader(20111). lt4610(36).trap(100).target(1).trapAction(2).0
You can also set it from the LT 4610 menu.
6. Restart the LT 4610.
7. When the LT 4610 restarts, check that the standard trap "ColdStart" is received by the
SNMP manager.
23.4 Enterprise MIB
Retrieving the MIB File
Copy the file from the LT 4610 to a USB memory device.
Connect a USB memory device to the LT 4610, and from the menu, select SYSTEM >
ETHERNET > COPY MIB INT > USB > OK. The file lt4610.my will be copied to the USB
memory device.
For details on how to use the MIB file, see the instruction manual for the SNMP manager.
[See also] 20.4.5, “Copying MIB Files to a USB Memory Device”
Enterprise Number
Leaders enterprise number is 20111.
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).leader(20111)
MIB Structure
lt4610 OBJECT IDENTIFIER ::= { leader 36 }
notification OBJECT IDENTIFIER ::= { lt4610 0 }
trapContent OBJECT IDENTIFIER ::= { notification 1 }
error OBJECT IDENTIFIER ::= { trapContent 1 }
normal OBJECT IDENTIFIER ::= { trapContent 2 }
trapStr OBJECT IDENTIFIER ::= { notification 2 }
standard OBJECT IDENTIFIER ::= { lt4610 1 }
status OBJECT IDENTIFIER ::= { standard 1 }
reference OBJECT IDENTIFIER ::= { standard 2 }
genlockRef OBJECT IDENTIFIER ::= { reference 1 }
blackRef OBJECT IDENTIFIER ::= { reference 2 }
black1Ref OBJECT IDENTIFIER ::= { blackRef 1 }
black2Ref OBJECT IDENTIFIER ::= { blackRef 2 }
black3Ref OBJECT IDENTIFIER ::= { blackRef 3 }
black4Ref OBJECT IDENTIFIER ::= { blackRef 4 }
black5Ref OBJECT IDENTIFIER ::= { blackRef 5 }
black6Ref OBJECT IDENTIFIER ::= { blackRef 6 }
sdiRef OBJECT IDENTIFIER ::= { reference 3 }
sdi1Ref OBJECT IDENTIFIER ::= { sdiRef 1 }
sdi1Format OBJECT IDENTIFIER ::= { sdi1Ref 1 }
sdi1Timing OBJECT IDENTIFIER ::= { sdi1Ref 2 }
sdi1Pattern OBJECT IDENTIFIER ::= { sdi1Ref 3 }
sdi1Component OBJECT IDENTIFIER ::= { sdi1Ref 4 }
sdi1SafetyArea OBJECT IDENTIFIER ::= { sdi1Ref 5 }

Table of Contents