24. APPENDIX
298
24.3 Firmware Update History
This manual is written for the following firmware versions.
LT 4610：Ver. 4.7
LT 4611：Ver. 2.2
To view the firmware version, select SYSTEM→VERSION DISPLAY→FIRMWARE.
LT 4610
• Ver. 4.6
[LT 4610] A function to record power failure, fan stop, and a function to record such
as interruption of analog video sync signal when the genlock format is
analog video sync signal were added to the genlock log item.
[LT 4610] Alarm and attention were added to the status item of the web browser.
[SER02] S-LOG3 Live HDR Multiformat Color Bar in the archive was changed to
Ver1.11.
• Ver. 4.4
[SER03] BMCA Enable/Disable function was added.
[SER03] When the genlock mode is analog video sync signal, the function to select
PTP as the time code source was added.
• Ver. 3.9
[SER02] HDR/SDR selection and USER PAYLOAD function were added to the 12G
OPTION menu.
[SER24] LT 4610SER24 (8K) is now supported.
• Ver. 3.7
[SER02] For 12G, it was changed to able to set a natural picture to a pattern for
each channel.
• Ver. 3.6
[SER02] For 12G, it was changed to able to select the pattern for each channel.
• Ver. 3.5
[SER03] The function to import PTP time code from VITC (hours, minutes and
seconds only) or VITC+SMPTE ST 309 (year, month, day) was added.
[SER03] The function to display CLOCK IDENTITY on the panel and web browser
was added.
• Ver. 3.0
[LT 4610] The web browser software was changed to support LT 4610SER03 (PTP).
• Ver. 2.9
[SER02] The transfer speed of a natural picture was increased.
• Ver. 2.8
[SER03] LT 4610SER03 (PTP) is now supported.
• Ver. 2.3
[LT 4610] The Web browser function was added.
To Next Page