LEADZM LZ-910 - Direction for Use; Power Connection; The Installation and Replacement of the Batteries in the Remote Control

Install Wind
Deflector:
Place and fix E(wind
deflector)on the right place
as shown in figure
E
Install Steering
Wheel:
Cannect SM terminal
first,place A( steering
wheel)on the right place
as shown in figure, use
J(M5 screw) to fix it.
A
J
①①
J
Install seat:
Place I(seat) onto the
right place, fix the two
hooks(on the back of the
seat)into the
corresponding on F(rear
wing)
Install Rear Wing:
Place and fix F(rear
wing)onto the right place
as shown in figure.
Install Mirror:
Place and fix C( Mirror
L),D( Mirror R) onto the
right place as shown in
figure.
F
C
D
K
K
I
F
Red Terminal
Power Port
Power Connection:
Find the positive electrode
(the red port showed by
arrow in figure), connect
power port to the red
terminal.
K
9
10
Power Port
Red Terminal
+ A A A -
AA A D C 1. 5 V
+
-
+ A A A -
1. The installation and replacement of the batteries
in the remote control:
Direction for use
1.All batteries should be inserted in the correct polarity.
2.Non-rechargeable battery cannot be recharged
3.Before charging, the rechargeable battery must be taken out from the
toys.
4.Take out and properly deal with the dead battery. To avoid injury, please
keep kids away from the battery.