2. Matching the frequency of car and remote control
See more details of the remote control please refer to the outer packing
box of the remote control.
Use a screwdriver to remove the battery cover of the remote control, insert
two AAA 1.5V dry batteries in correct polarity. Close the battery cover and
fix it with the screw. (Battery replacement also according to the above
steps)
5.The direct contact between the positive and negative terminals may result
in fire or explosion. Avoid direct connect between the terminals.
6.Do not mix old and new batteries.DO not mix alkaline, standard(carbon-
zinc),or rechargeable(nickel-cadmium) batteries.
7.Only an adult who has read and understood the safety warnings can
recharge the battery.
Operation manual: For the first time to use(Or Replace the
battery)Need to frequency bind
Take out the remote control,install the battery
Long press on the frequency key 2-4 seconds,Low speed LED lights
will flash
Turn on the power of the car,Low speed LED lights will from flash to
long lighting,then frequency bind succeed
If the frequency bind failed(Low speed LED lights flash), remove the
battery and repeat steps 1-3
3.Operation guide for Manual control (forward,
backward ):
After the driver is seated, press the power switch, the car will send out a
starting sound (2-5seconds). Put the Forward/Backward switch into the
position of “forward” (Press forward), step on the foot switch the car will
move forward , loosen the pedal the car will stop. Put the
Forward/Backward switch into the position of “Backward”, step on the foot
switch the car will move backward, loosen the pedal the car will stop.
Forward
Backward switch
Forward
Backward switch
horn button
light
switch
light
switch
power
switch
power
switch
music switch button
11
12
Remote control without operation after 10 seconds,indication light will
off into power saving mode
Button Description: forward backward turn left turn
right
S: Speed P:emergency brake,press it and the running
function willfaal,press again,it release
4.General music board
a)volume adjustment knob: rotate counterclockwise to decrease volume,
rotate clockwise to increase volume.
b) MP3 port: use audio cable to connect the car and other equipment to
play music.
volume
adjustment knob
Mp3 port
5.Instructions of the recoverable fuse
Mp3 port
volume
adjustment knob
Forward Button
LED Light
Reverse Button
Resettable fuse: when
the current exceeds a certain rating,
the recoverable fuse will automatically
cut off the power supply for 5-
10seconds, then the current will be
resupplied.
RISK OF FIRE. Do not bypass fuse. This may overload and damage the
electrical system. Replace only with original size and type.
!
WARNING
To Next Page
Loading...