Potential defects and their solutions
Situation # 3: The lights in the growbox are on, but
the app does not show the vegetating capsules
Solution:
1. Check that the microgreen capsule is inserted
correctly on the Mini tray and in the right place. Its
position in the application corresponds to the
position on the Mini tray. It is indicated by one to four
dots.
2. Check the status diode flashing and follow the
instructions for each situation (see the Table “What
does the side diode flashing on the Mini indicate?”).
3. Should the previous tips not help, unplug the
growbox for five seconds. The Mini restarts, and it
usually solves the problem.
4. If the Mini has already detected the growth phase
ready for harvesting, adult plants of larger
microgreen species such as radish may cover the QR
code of the capsule. In exceptional cases, artificial
intelligence cannot pair the capsule with an
appropriate position. Try to slightly push the plants in
the capsule so that they do not cover the QR code.
The capsule should re-appear in the application
within an hour.
11
To Next Page
Loading...