EasyManua.ls Logo

LEAF LEARN microgreens mini - Troubleshoot: Growbox Issues After Wi-Fi Change

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Potential defects and their solutions
Problem # 4: The lights in the growbox are on, but
the application shows a different growth phase
than I observe
Solution: There may have been a temporary or
persistent Wi-Fi outage. Check that the Mini flashes
green once every 10 seconds. If so, check the
application settings when the last pictures were
taken and if your Wi-Fi is active. If the Wi-Fi is active,
unplug the Mini growbox for five seconds (remember
that the growbox is not lit at night, and at 6 a.m., it
can, therefore, display the status from the previous
evening). The Mini shall restart, and it usually solves
the problem. Should the Mini growbox flash red,
check the Table What does the side diode flashing on
the Mini indicate?” and follow the instructions.
Problem # 5: After changing the Wi-Fi settings, the
Mini growbox does not light up or lights up, but
flashes red
Solution: Reset the Wi-Fi so that the Mini growbox
can connect correctly. Unplug the Mini for five
seconds and turn it on again. While the diode is
flashing rapidly red and green, press and hold the
button placed in the second aperture of the plastic
cap so that you can feel a slight click, hold it for about
five seconds.
12