Potential defects and their solutions
…
When you release the button, the diode shall start
flashing red and green slowly. Follow the instructions
for launching the Mini growbox, section “Connect the
Mini growbox to Wi-Fi”. Fill in a new SSID and
password and press “Save and Reboot” button.
Problem # 6: I want to change network settings
Solution: Unplug the Mini for five seconds and turn it
on again. While the diode is flashing rapidly red and
green, press and hold the button placed in the second
aperture of the plastic cap so that you can feel a
slight click, hold it for about five seconds. When you
release the button, the diode shall start flashing red
and green slowly. Follow the instructions for
launching the Mini growbox, section “Connect the
Mini growbox to Wi-Fi”. Fill in a new SSID and
password and press “Save and Reboot” button.
Problem # 7: Neither the Mini growbox nor any of
the troubleshooting mentioned above work
Solution: Please, contact our hotline
support@microgreens.ai. If we are unable to assist
you, please complain about the goods.
13
To Next Page
Loading...