Potential defects and their solutions
Problem # 8: I want to change the Mini growbox
settings, but even after holding the button for a
long time, the red/green diode does not start
flashing slowly alternately. The growbox restarts
to the standard operation mode.
Solution: Try unplugging the Mini growbox for 30 to
60 minutes during active lighting; this step will not
affect the growth analysis. Try to reset the Mini to the
configuration settings again, just as if you would
when changing the network settings (Problem # 6). If
that doesn’t work, contact our hotline
support@microgreens.ai.
Problem # 9: The Mini growbox works, but the
capsule grows poorly
Solution: First, please make sure that you have
followed the instructions for growing microgreens
from capsules (see the section “Insert the first
capsule into the Mini”). Also, keep in mind that plants
are living organisms. Our capsules are not chemically
treated and contain organic quality seeds. During
growth, they may, therefore, show slight deviations
from the average growth, just like in nature. Give the
plants a chance. However, if the capsule smells, throw
it away and replace it with a new one. If you have any
questions, you can contact our hotline
support@microgreens.ai.
14
To Next Page
Loading...