5
Unlock the packaging locks:
Rotate the packaging locks 90
degrees counterclockwise.
Pull out the packaging locks
and discard.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the battery cover.
4. Install 4 new AA (AM-3/LR6) batteries into the battery box as
illustrated. (The use of new alkaline batteries is recommended
for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.
To Next Page
Loading...
Need help?
General