Technology Wi-Fi 2.4GHz 802.11 b/g/n
Channels
13 (2412 - 2462 MHz)
Maximum power used by the transmitter: 0.10W (100mW)
Internet Connection
Minimum Requirement: 1.5 Mbps @ 720p or 2.5 Mbps @ 1080p
upload bandwidth per Baby Unit
LCD 5” Color LCD (IPS 1280x720 pixels)
Nominal
effective range
Actual operating range may vary according to environmental
conditions at the time of use.
Power requirements
Parent unit: 3.7V 5000mAh Lithium-ion battery
Baby Unit power adapter: Output: 5V DC @ 1.5A
Parent unit power adapter: Output: 5V DC @ 2A
Credits:
The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.
Find the answer to your question on our knowledge-rich
Online Support Page. Get assisted at your own pace and
learn what your monitor is capable of.
Scan the QR code to access the Online Support
Page or visit leapfrog.com.au/support
Online Manual
Specifications are subject to change without notice.
© 2023 LeapFrog Enterprises, Inc.
a subsidiary of VTech Holdings Limited.
All rights reserved. 01/23. LF925-XHD_AU_QSG_V3
Technical Specifications
Android
TM
and Google Play
TM
are trademarks of Google Inc.
App Store is a trademark of Apple Inc., registered in the U.S. and other countries.
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
To Previous Page
Loading...
