20
TROUBLESHOOTING
If for some reason the program/activity stops working, please follow
these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit will now be ready to play again.
5. If the unit still does not work, install a new set of batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. and Canada, or email
support@leapfrog.com. Creating and developing LeapFrog
products is accompanied by a responsibility that we take very
seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know that
we stand behind our products and encourage you to contact us
with any problems and/or suggestions you might have. A service
representative will be happy to help you.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It
should revert to normal operation when the interference stops. If not, it
may become necessary to turn the power Off and back On, or remove
and reinstall the batteries. In the unlikely event of an electrostatic
discharge, the unit may malfunction and lose memory, requiring the
user to reset the device by removing and reinstalling the batteries.
IMPACT DE L’ENVIRONNEMENT
Une défaillance de fonctionnement de l’appareil peut survenir s’il est
sujet à des interférences avec les fréquences radioélectriques. Le
fonctionnement normal de l’appareil devrait reprendre avec l’arrêt
des interférences. Si ce n’est pas le cas, il peut s’avérer nécessaire
d’éteindre et rallumer l’appareil ou de retirer et réinstaller les piles.
To Next Page
Loading...