12
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp
cloth.
2. Keep the unit out of direct sunlight and away from any
direct heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
5. Try to change the batteries for new ones if the toy is not
working properly.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions,
please follow these steps:
1.
Turn the unit
OffOff
.
2.
Interrupt the power supply by removing the batteries.
3.
Let the unit stand for a few minutes, then replace the batteries.
4.
Turn the unit back
OnOn
. The unit should now be ready to play
with again.
5.
If the unit still does not work, install a brand new set of batteries.
Environmental phenomena
The unit may malfunction if subjected to radio-frequency interference. It
should revert to normal operation when the interference stops. If not, it may
become necessary to turn the power OFFOFF and back ONON, or remove and reinstall
the batteries. In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the device by removing
and reinstalling the batteries.
To Next Page
Loading...
Need help?
General