The seat has been pre-set to align with
the centre axle position on the frame. If it
is necessary to alter the depth of the seat,
loosen the two adjustment screws (A).
Slide the seat forwards or rearward as
required and tighten the screws, ensuring
that both screws that hold the seat are
secure.
8.9 Seat depth adjustment 8.10 Removing the child
To remove the child from the Kidwalk,
first lock the wheels, unfasten the buckles of
the forward pads on the hip assembly
and lateral chest assembly. Rotate the
forward pads upwards and outward to allow
clearance to exit and lift the child forward and
off the seat.
A
To Next Page
Loading...
