9.1 Adjusting the lateral
chest assembly
9.2 Adjusting the headpad
To adjust the height, loosen the adjustment
screw (A), slide the lateral chest system
up or down on the extension tube to desired
height and tighten the adjustment screw
(A) securely.
To adjust the width, loosen the adjustment
screws (B), slide the pads inwards, making
contact with the body in the desired upper
body posture and tighten adjustment
screws (B). Flip front lateral pads down into
place, snap the buckles together and pull
straps securely.
Adjust the headpad height and depth by
loosening the knobs (C & D), setting to the
desired height and depth and retightening.
C
B
A
B
D
To Next Page
Loading...
