Squiggles
+
Stander User Manual p.7
The Squiggles + Stander
can be used as a prone,
supine or upright stander
and has been designed to
t with a pivot chassis.
7.2 Attaching stander
to pivot chassis
To attach the stander to
the Pivot Chassis, pull the
locking pin out , slide
the central spine into the
receiving bracket until it is
fully engaged, release the
pin allowing it to snap
back into place.
Always make sure the locking
pin is fully engaged before
you place the child
in the stander.
To Next Page
Loading...
