Leckey Squiggles+ - Headrest Attachment

p.8 Squiggles
+
Stander User Manual
7.3 Attaching the headrest
To attach the Leckey
headrest rst open the
locking lever by pressing
the safety button and
pulling the handle .
Then slide the stem into
the receiving bracket on
the central spine, set to
the desired position
and secure using the
locking handle.
The product contains
components which
could present a choking
hazard to small
children. Always check
that locking knobs and
bolts within the child’s
reach are tightened
and secure at
all times.
7.4 Inserting
attachment bolt
Insert the required
attachment bolt along
with the retention plate .
Place a rubber lid on,
both, the top and bottom
of the sandal. Fasten using
the four screws provided.
To remove or replace the
attachment bolt, reverse
this process.