Lectra Alys 120 - Removal of the Y carriage drive belt; Plotter maintenance; Head support rails and general cleaning

 6MKLXWMHISJ4PSXXIVWIIRJVSQXLIFEGO
%P]WQEMRXIRERGIQERYEP %%
 6IQSZEPSJ=GEVVMEKI+YMHIWSGOIXWHVMZIFIPX
The Y carriage must be removed in order to change the guide sockets. To do
this, carry out the “Removal of the plotting block” as well as the removal of
the Y carriage drive belt.
 6IQSZEPSJXLI=GEVVMEKIHVMZIFIPX
=GEVVMEKI
1EOIEQEVOSRXLI=
QSYRXMRKXSMRHMGEXIXLI
TSWMXMSRSJXLIHVMZIFIPX
XMKLXIRIVWSMXWVITSWMXMSRMRK
MWIEWMIV
9RWGVI[XLIVIXIRXMSRRYX
9RWGVI[XLIVYFFIVPMQMXWXST
9RWGVI[XLIFIPXXIRWMSR
EHNYWXQIRXWGVI[