✓ Never use a device supplied with a PIN code and/or a recovery phrase.
✓ Contact Ledger Support in case of doubt.
2.2.3 Entering your recovery phrase
1. Choose the length of your recovery phrase 12, 18, or 24 words). Press both
buttons to validate.
Make sure the correct recovery phrase length is selected. Always enter all words
of a recovery phrase.
2. Enter the first letters of Word #1 by selecting them with the right or left button.
Press both buttons to validate each letter.
3. Choose Word #1 from the suggested words. Press both buttons to validate it.
4. Repeat the process until the last word of your recovery phrase.
Your device is ready is shown once you've successfully completed the setup
process.
5. Press both buttons for 3 seconds to open the Control Center.
Security tips
✓ Anyone with access to your recovery phrase could take your assets, store it
securely.
✓ Ledger does not keep a backup of your 24 words.
✓ Never use a device supplied with a recovery phrase and/or a PIN code.
✓ Contact Ledger Support in case of doubt.
To Next Page
Loading...
