LEGA
LEGA LEGA
LEGA
srl
srlsrl
srl
C
CC
Costruzioni
ostruzioni ostruzioni
ostruzioni A
AA
Apistiche
pistichepistiche
pistiche
–
––
–
via Maestri del Lavoro 23
via Maestri del Lavoro 23 via Maestri del Lavoro 23
via Maestri del Lavoro 23 –
––
–
48018 Faenza
48018 Faenza48018 Faenza
48018 Faenza
www.legaitaly.com
www.legaitaly.com www.legaitaly.com
www.legaitaly.com -
--
-
Tel 054626834
Tel 054626834 Tel 054626834
Tel 054626834 –
––
–
Fax 054628279
Fax 054628279 Fax 054628279
Fax 054628279 –
––
–
P.iva 00043230390
P.iva 00043230390P.iva 00043230390
P.iva 00043230390
12 / 40
1.3
1.31.3
1.3
MACHINE OPERATORS
MACHINE OPERATORSMACHINE OPERATORS
MACHINE OPERATORS
CAUTION!
CAUTION!CAUTION!
CAUTION! FOR SAFETY PURPOSES, THIS MACHINE SHOULD BE USED BY SKILLED STAFF ONLY, AWARE
OF THE INSTRUCTIONS CONTAINED IN THIS MANUAL WHICH FORMS AN INTEGRAL PART OF THE
MACHINE.
The uncapping machine has been designed for operation by a single worker.
Basic technical and mechanical skills are required to correctly operate the machine and carry out maintenance
and basic servicing.
1.4
1.41.4
1.4
DIRECTIONS / RECOMMENDED AND NOT RECOMMENDED USE
DIRECTIONS / RECOMMENDED AND NOT RECOMMENDED USEDIRECTIONS / RECOMMENDED AND NOT RECOMMENDED USE
DIRECTIONS / RECOMMENDED AND NOT RECOMMENDED USE
For efficient machine operation, the frame wood thickness must be constant and the use of spacers is
recommended if the frames are not fitted with an Hoffman spacer.
The frames should not have any protruding parts e.g. nails.
We recommend using supers with spacers at least one notch down from the hive frame number (e.g. for a
10-frame beehive, use supers with 9 frames or better still, 8 frames).
This
ThisThis
This
machine should be exclusively used for uncapping frames.
machine should be exclusively used for uncapping frames.machine should be exclusively used for uncapping frames.
machine should be exclusively used for uncapping frames.
1.5
1.51.5
1.5
HANDLING / TRANSPORT
HANDLING / TRANSPORTHANDLING / TRANSPORT
HANDLING / TRANSPORT
The uncapping machine cannot be lifted or handled manually by a single person. The machine can be
transported unpacked or in suitable packing (e.g. wooden crate).
Transport is normally carried out by appointed forwarders on the customer's own responsibility.
During transport, the crate containing the machine must be firmly secured with ropes or cables to prevent it
moving about.
The machine can be handled with lift trucks or pallet trucks.
The machine weighs approximately 49 kg, the lifting equipment must therefore be of adequate capacity.
PROCEED VERY SLOWLY WHEN HANDLING THE MACHINE
PROCEED VERY SLOWLY WHEN HANDLING THE MACHINEPROCEED VERY SLOWLY WHEN HANDLING THE MACHINE
PROCEED VERY SLOWLY WHEN HANDLING THE MACHINE!
!!
!
To Next Page
Loading...