Lega DV2 - Standard and Non-Standard Modes

LEGA
LEGA LEGA
LEGA srl
srlsrl
srl C
CC
Costruzioni
ostruzioni ostruzioni
ostruzioni A
AA
Apistiche
pistichepistiche
pistiche –
––
– via Maestri del Lavoro 23
via Maestri del Lavoro 23 via Maestri del Lavoro 23
via Maestri del Lavoro 23 –
––
– 48018 Faenza
48018 Faenza48018 Faenza
48018 Faenza
www.legaitaly.com
www.legaitaly.com www.legaitaly.com
www.legaitaly.com -
--
- Tel 054626834
Tel 054626834 Tel 054626834
Tel 054626834 –
––
– Fax 054628279
Fax 054628279 Fax 054628279
Fax 054628279 –
––
– P.iva 00043230390
P.iva 00043230390P.iva 00043230390
P.iva 00043230390
16 / 40
SAFETY
SAFETY SAFETY
SAFETY STANDARD
STANDARD STANDARD
STANDARD OPERATION
OPERATIONOPERATION
OPERATION
(key on the left not inserted, key on the right rotated to the left – step by step mode with two buttons
Press and hold down both the cycle start button (fig. 1 A) and that on the left control panel.
The chain continues to move forward (step by step operation) as long as the buttons are pressed and held down.
It is also possible to load the frames after the uncapping machine has been started, in a continuous manner.
If a frame gets stuck, turn the main switch (fig. 1 C) to the left.
Hold down the ‘start cycle’ green button on the left of the machine (fig.1.1) so that the frame moves back,
then re-place the frame correctly.
To stop the uncapping machine, turn the main switch (fig. 1 C) to its 0 position.
NON
NONNON
NON-
--
-STANDARD OPERATIO
STANDARD OPERATIOSTANDARD OPERATIO
STANDARD OPERATION
NN
N 1
1 1
1 –
––
– FOR THE MAINTENA
FOR THE MAINTENAFOR THE MAINTENA
FOR THE MAINTENAN
NN
NCE
CE CE
CE STAFF
STAFFSTAFF
STAFF ONLY
ONLYONLY
ONLY
(key on the left inserted and rotated, key on the right rotated to the left – step by step mode with one button
only
Press and hold down only the cycle start button on the right (fig. 1 A).
By rotating the speed selector (fig. 1 B) to the right, the machine will operate in the FORWARD mode; by rotating the
selector to the left (fig. 1 C) the chain will move in the opposite direction in the continuous operation mode .
NON
NONNON
NON-
--
-STANDARD OPERATION
STANDARD OPERATION STANDARD OPERATION
STANDARD OPERATION 2
22
2 –
––
– FOR THE MAINTENANCE STAFF ONLY
FOR THE MAINTENANCE STAFF ONLYFOR THE MAINTENANCE STAFF ONLY
FOR THE MAINTENANCE STAFF ONLY
(key on the left inserted and rotated, key on the right rotated to the right – continuous operation mode
By rotating the speed selector (fig. 1 B) to the right, the machine will work in the continuous FORWARD mode; by
rotating the selector to the left (fig. 1 C) the chain will move in the opposite direction in the continuous operation mode .
In case of danger,
In case of danger, In case of danger,
In case of danger, push
push push
push the emergency button
the emergency buttonthe emergency button
the emergency button on the
on the on the
on the right
rightright
right of the control panel.
of the control panel.of the control panel.
of the control panel.
The emergency stop shall prevail over all other func
The emergency stop shall prevail over all other funcThe emergency stop shall prevail over all other func
The emergency stop shall prevail over all other functions and operations.
tions and operations.tions and operations.
tions and operations.