What to do if Leggett & Platt Prodigy 2.0 remote illuminates but won't activate base?
If the Leggett & Platt Indoor Furnishing remote control illuminates but doesn't activate the base, first, test the outlet by plugging in another working appliance. If the outlet is functional, wait 30 minutes before attempting to operate the base again. Once the base resumes normal operation, avoid exceeding the duty cycle.
Why no features of Leggett & Platt Indoor Furnishing base will activate?
If no features of your Leggett & Platt Indoor Furnishing base are activating, check the electrical service breaker box to verify it's working. Test the outlet by plugging in another working appliance. You may also need to reset the electronic components. Refer to the Remote Control Programming section of this manual for programming procedures.
What to do if Leggett & Platt Indoor Furnishing head or foot won't return to flat position?
If the head or foot section of your Leggett & Platt Indoor Furnishing elevates but won't return to the flat position, check for any obstructions and remove them. Also, verify that the unit is receiving power.
How to reduce massage motor noise in Leggett & Platt Prodigy 2.0?
To reduce excessive massage motor noise in your Leggett & Platt Indoor Furnishing, try placing rubber caster cups under each leg or caster of the base. Realign the lift/lower mechanisms with the bed support platform. Ensure that any furniture or other objects causing vibration or noise are removed. Also, verify that the motors are not causing the bed frame (or bed frame components) to vibrate.
Why Leggett & Platt Prodigy 2.0 Indoor Furnishing remote control will not illuminate?
If the Leggett & Platt Indoor Furnishing remote control will not illuminate, replace the batteries in the remote control.
Guides on screwing in legs and carefully lifting/orienting the base.
Guides on inserting two 9-volt batteries into the power brick for backup power.
Procedure for using the remote to lower the base to a flat position during outages.
Detailed explanation of each button's function on the remote control.
Step-by-step guide to program a remote to control a single adjustable base.
Procedure for synchronizing two bases to operate simultaneously with one remote.
Steps to revert two synchronized bases to individual remote control operation.
Provides a chart of common symptoms and their corresponding solutions for base issues.
General| Wireless Remote | Yes |
|---|---|
| Head Lift | Yes |
| Foot Lift | Yes |
| Weight Capacity | 850 lbs |
| Wallhugger | Yes |
| Zero Gravity | Yes |
| Model | Prodigy 2.0 |
| Wall-Hugging Feature | Yes |
| Type | Adjustable Bed |
| USB Ports | Yes |
| Massage Feature | Yes |
| Sizes | Twin XL, Full, Queen, King, Split King |
| Preset Positions | Yes |
| Programmable Positions | Yes |
| Product Type | Adjustable Bed Base |
To Next Page
