Identification No.
Min. =
Max. =
12
Operation
This device enables the automatic remote control
of a light source by movement detection in its
surveillance area.
The control is radio transmitted to a receiver
linked during the learning
(1)
of a scenario
(2)
.
It can be bound to a lighting level.
(1) Learn phase: action of linking products to be
controlled simultaneously from a central point.
This linking is performed by applying the
scenario learning procedure on page 13.
(2) Scenario: corresponds to all the products
(actors) that are linked to a control key.
Battery replacement
1.5 V AA alkaline battery (take care to ensure correct polarity).
To ensure the product functions properly, change the battery
every 2 years.
To Next Page
Loading...
