87045 LIMOGES Cedex
Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88
Technical data sheet: F01017EN/01
Catalogue number(s): 488 10
Updated on: 17/08/2010
Created on: 07/05/2010
1/4
Detector switch - PIR surface mounted
CONTENTS
1. USE
This device allows a light source to be controlled automatically through
the detection of movement in the surveillance zone.
Movement detector with detection angle of: 270° horizontally
Vertical angle: 90°
Detection type: infra-red (PIR)
Assembly type: wall and ceiling
2. TECHNICAL FEATURES
Voltage: 100-240 V~
Frequency: 50 / 60 Hz
No load power consumption: 0.4W
Outlet via normally open contact connected to the phase
Wiring: 2 x 2.5 mm
2
Surface mounted
Weight: 205 g
Impact resistance: IK04
Penetration by solid and liquid matter: IP55
Usage temperature: -5°C to +45°C
Storage temperature: -20°C to +70°C
CONTENTS Page
1. Use ............................1
2. Technical features ................1
3. Overall dimensions................1
4. Connection ......................2
5. Installation ......................2
6. Settings ........................3
7. Performance.....................3
8. Maintenance.....................4
9. Standards and certifications.........4
3. OVERALL DIMENSIONS
230 V~ 2000 W 8.5 A 2000 W 8.5 A 1000 VA 4.3 A 10x(2x36 W) 4.3 A 500 VA 2.1 A 1000 VA 4.3 A
I max. 2A
110 V~ 1000 W 8.5 A 1000 W 8.5 A 500 VA 4.3 A 5x(2x36 W) 4.3 A 250 VA 2.1 A 500 VA 4.3 A
1 2 3 4 5 6 7
82 104
166
1 Incandescent bulb
2 Tungsten halogen bulb
3 Tungsten halogen bulb with separate ferromagnetic transformer or electronics
4 Fluorescent tubes
5 Compact fluorescent bulb with built-in ballasts
6 Compact fluorescent bulb with separate ferromagnetic ballasts or electronics
7 Contactors
Detector / PIR Detector
PIR receiver LED
(for configuration tool
or navigation bar)
PIR transmission LED
(for configuration tool)
LEARN button
Green detection indicator
Green programming indicator